Trying to do direct mode with Toshiba Thrive

[mike777sprint]

I have tried several different methods from this forum to get direct mode to work on my Toshiba Thrive from a Nikon D7000
The last method I tried was to setup to connect to my home network. Take 3 pictures and let them transfer to the computer and this works great.
I then go back in the eye-fi card and remove the home network and click on direct mode and set 2 minutes and save then click the direct mode to enable it. I start the eye fi on the thrive and take pictures with the camera and all the network eye-fi network just keeps on scanning and nothing transfers. Here is last part the log from the card as the total log file was too large to post. As i said I have tried several different methods so I imagine the log file has that on it but the last try was what I stated above.
[00:00] Eye-Fi firmware 5.0001 Dec 19 2011 16:43:24 started (1), hardware revision 1, CID "AF2G8M", 7596/32 MB, 00-18-56-43-09-9c
[00:01] Marvell 8786 firmware version 12.57.6.p53 running, xtal offset 180/180.
[00:03] Card is in desktop (0x002) transfer mode (timestamp 1325315306), geo-tagging is enabled, hotspots are disabled.
[00:03] Using sync mode SELSHARE.
[00:03] BGOPS 1 MaxDiv FastClock 1 3 !skip 0
[00:04] ---------------- SCAN-P -----------------------
[00:04] Region change: US
[00:05] Scan complete
[00:07] ---------------- SCAN-A -----------------------
[00:08] Done scanning for all photos. Uploads pending.
[00:08] None of the 0 configured wireless networks detected among the 2 within range.
[00:09] Starting scan of media directories...
[00:09] Done scanning for new media (detected 616 MB in all media). Uploads pending.
[00:09] Done scanning for all photos. Uploads pending.
[00:09] None of the 0 configured wireless networks detected among the 4 within range.
[00:09] Scan complete
[00:14] Starting scan of media directories...
[00:14] Done scanning for new media (detected 616 MB in all media). Uploads pending.
[00:14] Done scanning for all photos. Uploads pending.
[00:14] AP Started "Eye-Fi Card 43099c"...
[00:00] Eye-Fi firmware 5.0001 Dec 19 2011 16:43:24 started (1), hardware revision 1, CID "AF2G8M", 7596/32 MB, 00-18-56-43-09-9c
[00:01] Marvell 8786 firmware version 12.57.6.p53 running, xtal offset 180/180.
[00:03] Card is in desktop (0x002) transfer mode (timestamp 1325315306), geo-tagging is enabled, hotspots are disabled.
[00:03] Using sync mode SELSHARE.
[00:03] BGOPS 1 MaxDiv FastClock 1 3 !skip 0
[00:04] ---------------- SCAN-P -----------------------
[00:05] Scan complete
[00:07] ---------------- SCAN-A -----------------------
[00:07] Region change: US
[00:08] Done scanning for all photos. Uploads pending.
[00:08] None of the 0 configured wireless networks detected among the 4 within range.
[00:09] Starting scan of media directories...
[00:09] Done scanning for new media (detected 616 MB in all media). Uploads pending.
[00:09] Done scanning for all photos. Uploads pending.
[00:09] None of the 0 configured wireless networks detected among the 5 within range.
[00:09] Scan complete
[00:14] AP Started "Eye-Fi Card 43099c"...

[mike777sprint]

Never mind... I finally got it to work but have no idea what I did to get it to work.

[MikesTooLz]

LOL, It probably wasn't you.